Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.!!<
Physical Properties |
ecommended Cutting |
Scissor |
Colors |
4 |
Tensile Strength PSI (ASTM D-638) |
1,500 |
Elongation % (ASTM D-638) |
200 |
Deformation % (MIL-DTL-23053) |
Max. 50 |
Secant Modulus PSI (MIL-DTL-23053 |
25,000 |
Longitudinal Change %(MIL-DTL-23053) |
+5, -15 |
|
|
Electric |
Dielectric Strength (ASTM D-876; V/Mil) |
500 |
Volume Resistivity (ASTM D-876; ohm-cm) |
1.0x1014 |
Operating Temperatures |
|
Minimum Continuous |
-67??F/-55??C |
Maximum Continuous (MIL-I-23053) |
257??F/125??C |
Shrinks |
194??F/90??C |
|
>!! |
|