Note - we're booked up for most of November - pop us an email for any enquiries or to schedule an appointment in store.
Support for Pump + Reservoir, it is born to help the integration of liquid cooling solutions on the Dimastech Bench Table Easy V2.5.The support will be placed on the back of the Bench Table, where are available holes to fix it, near the power supply. Dimastech Bench Table Easy V2.5, can house 2 of this support, for 2 separate liquid Cooling systems.Mounting is very easy, the reservoir will be placed on the top, with the water exit pointing down, and the pump inlet pointing high, than the water outlet of the pump will direct point on the radiator Inlet on the left side of the Dimastech Bench Table Easy V2.5.For the low profile pump we suggest using modded Tops for outlet pointing in radiator direction.Colour Support:Black12v Pumps Compatible:Laing ddc 350/500 & swiftech 350,Laing D4/D5 Vario & swiftech 355/655,Sanso PD054,aquacomputer, aquaxtream,Contact us if your pump is not available, we will check and tell if it is compatible.Compatible Reservoirs:Alphacool Cape Coolplex Pro/Pro plexy 10,Alphacool Cape Coolplex Pro/Pro plexy 25,EK MultiOption 150 Rev.2 250mm,Ybris Flow trap evo, Ybris flow trap sphere,Ybris Micro Trap,Compatible with all the vertical Reservoirs,the vertical support have holes to fix every axial reservoir hold down.