Phobya presents an innovative fan controller which fulfils both the high
technological requirements of high-end cooling systems as well as the
optical demands of ambitious PC modders. The Phobya "Touch 6" fan controller
is an attractive option especially for water cooling users. Even
price-conscious users will find the right controller in the Touch 6, as
there are only few comparable controllers which bring such a level of
performance at this price range.
Easy configuration via the touch panel allows the speed for each channel to
be set depending on the temperature. Either temperature or fan speed can be
displayed at the touch of a finger! Up to 30W of power output per channel
make the controller ideal for computers with water cooling. 30W per channel
mean that even 9 fans (with a power consumption <3W per fan) can be
controlled via one channel. Six temperature sensors, one 4-Pin connection
cable as well as six 3-Pin extension cables are included with the Touch 6
fan controller.
The Phobya Touch 6 fan controller boasts the following features:
- Front made from anodized Aluminium
- Monitoring and display of fan speeds
- Monitoring and display of temperature data from the sensors (?C or ?F
display possible)
- Suitable for installation in a 5.25" drive bay
- Power via system PSU, 4-Pin Molex
- Up to six fans can be connected via 4-Pin Molex
Technical specifications:
Material: Aluminium
Colour:
Black / Silver (exchangeable)
Dimensions:
148,5 x 42 x 79,9mm (5.25" drive bay)
Display dimensions: 112.5mm x 22.2mm
Output voltage: 5-12V
Ideal power output per channel: 30W
Fan channels: Up
to 6
Extent of delivery:
1x
Phobya Touch 6 fan controller - single bay 5.25" - black
6x 60cm 4-Pin fan
extension cables
6x temperature sensors with 60cm cable
1x 4-Pin
Molex cable
Mounting screws
Illustrated English mounting manual